Best 25 Double Coated Tapes

 

3M X-Series Hi-Tack Double Coated Tape XT6110 2 in x 36 yd Case of 24
3M X-Series Hi-Tack Double Coated Tape XT6110, 2 in x 36 yd (Case of 24)
3M X-Series Hi-Tack Double Coated Tape XT6110, 2 in x 36 yd (Case of 24) - Adhesive provides temperature performance up to 180&#176f. High tack soft acrylic adhesive has high initial adhesion for attachment to most lightweight materials, including papers, chipboard, metal, plastics, fabrics and foams. Internal polyester film carrier offers strength and dimensional stability.

 

JVCC DC-UHB60FA-C Ultra High Bond Double Coated Tape 1 in x 82 ft Clear
JVCC DC-UHB60FA-C Ultra High Bond Double Coated Tape: 1 in. x 82 ft. (Clear)
JVCC DC-UHB60FA-C Ultra High Bond Double Coated Tape: 1 in. x 82 ft. (Clear) - Notes sizes shipped will typically be the tape industry standard metric-cut sizes, i. Ideal for all around bonding in the most demanding of applications. This product’s actual size is 25. E. For lower energy surfaces may need to use an adhesive promoter/primer such as ipa (isopropanol) on the substrate prior to application. Tape is carried on a red, release coated polyethylene liner that is easily removed. The pressure sensitive acrylic composition has very good tack has excellent adhesion to a variety of surfaces and has high shear strength performance. Has good uv resistance. The dwell time the tape needs to be in contact with both surfaces, before it reaches it maximum adhesion, is 1 to 24 hours. Jvcc uhb60fa-c ultra high bond double coated tape is constructed of a clear foamed acrylic system which has excellent all around bonding properties which allows for very high performance in the most demanding of applications. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). 4mm wide. At a minimum application pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. Tape will bond to most surfaces including many plastics, composites, sealed woods and metals however thorough evaluation is recommended when bonding to low energy surface material such as polyethylene, polypropylene, silicones and teflon. Image does not show a full 27 yard roll. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to.

 

3M Double Coated Tape Extended Liner 9925XL Off-white Translucent 12 in x 750 yd 25 mil Case of 12
3M Double Coated Tape Extended Liner 9925XL Off-white Translucent, 1/2 in x 750 yd 2.5 mil (Case of 12)
3M Double Coated Tape Extended Liner 9925XL Off-white Translucent, 1/2 in x 750 yd 2.5 mil (Case of 12) - Quick stick, immediate bond applications used for sealing, splicing, bonding, mounting, attaching, holding, affixing, joining, and laminating paper to paper applications, small packaging, pharmaceutical outserts, seals flaps on bags or envelopes used o. 25 mil double coated tape with an off-white densified kraft paper printed liner with statement remove to expose adhesive on scotch plaid background. Dry edge, finger lift edge, convenience easy liner starting and removal ideal for automated tape application equipment tack free tape roll edges for ease of use and reduced equipment maintenance. General purpose adhesive transfer and double coated tapes with extended liners used on a variety of high surface energy and low surface energy hse lse materials such as coated and uncoated papers, films, plastics, foams and metals. Pharmaceutical, medical, paper and print, commercial printing, packaging, pop point of purchase, general industrial.

 

JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape 1 in x 36 yds Grey
JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape: 1 in. x 36 yds. (Grey)
JVCC DC-UHB45FA-G Ultra High Bond Double Coated Tape: 1 in. x 36 yds. (Grey) - When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. The color name grey can also be spelled as gray. The pressure sensitive acrylic composition has very good tack has excellent adhesion to a variety of surfaces and has high shear strength performance. Ideal for structural bonding applications in the transportation industry. This product’s actual size is 25. E. Used in automotive aftercare market and in body shops for crash repair as well as mounting/fixing car side molding and emblems. Jvcc uhb45fa-g ultra high bond double coated tape is constructed of a grey foamed acrylic system which has excellent all around bonding properties which allows for very high performance in the most demanding of applications. For lower energy surfaces may need to use an adhesive promoter/primer such as ipa (isopropanol) on the substrate prior to application. Tape will bond to most surfaces including many plastics, composites, sealed woods and metals however thorough evaluation is recommended when bonding to low energy surface material such as polyethylene, polypropylene, silicones and teflon. At a minimum application pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. Has good uv resistance. Notes sizes shipped will typically be the tape industry standard metric-cut sizes, i. The dwell time the tape needs to be in contact with both surfaces, before it reaches it maximum adhesion, is 1 to 24 hours. If not otherwise specified widths shown in dropdown are in inches. Tape is carried on a red, release coated polyethylene liner that is easily removed. 4mm wide. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size).

 

Scotch Double-Coated Tissue Tape 1 Inch x 36 Yards 3 Inch Core 410M
Scotch Double-Coated Tissue Tape, 1 Inch x 36 Yards, 3 Inch Core (410M)
Scotch Double-Coated Tissue Tape, 1 Inch x 36 Yards, 3 Inch Core (410M) - Item sold by the single roll. Natural rubber adhesive system offers good to excellent adhesion to many types of surfaces. Paper carrier specially treated to improve strength and removability. 5 mils thick with adhesive 850 has an excellent balance of high initial adhesion and good holding power to a wide variety of materials.

 

Intertape Polymer Group - Double Coated Tapes 592 White 2X36Yds Crepedouble Faced Tape 761-82741 - 592 white 2x36yds crepedouble faced tape
Intertape Polymer Group – Double Coated Tapes 592 White 2X36Yds Crepedouble Faced Tape: 761-82741 – 592 white 2x36yds crepedouble faced tape
Intertape Polymer Group – Double Coated Tapes 592 White 2X36Yds Crepedouble Faced Tape: 761-82741 – 592 white 2x36yds crepedouble faced tape - Dimensions overall product weight -1. -Tensile strength (2) 23 lb/in. 02 pounds. Generic dimensions -thickness 6 mil. -Easy-release treated white liner. 761-82741 features -592 is a double-coated crepe paper tape designed for joining two surfaces. -It is ideal for the printing and textile industry, and certain splicing applications. Product type -double-sided tapes.

 

3M Double Coated Tape 9579 White 2 in x 36 yd 90 mil Case of 24
3M Double Coated Tape 9579 White, 2 in x 36 yd 9.0 mil (Case of 24)
3M Double Coated Tape 9579 White, 2 in x 36 yd 9.0 mil (Case of 24) - Protecting, label protection, bar code scanning, bar code reading, protect, holding, bar coad tape protection, attaching, labeling and shipping. Surface easy to write on.

 

1 2 48MM Shurtape Double Coated Two Sided Stick Clear Tape 165 55 yard roll
1 2″ 48MM Shurtape Double Coated Two Sided Stick Clear Tape 165′ 55 yard roll
1 2″ 48MM Shurtape Double Coated Two Sided Stick Clear Tape 165′ 55 yard roll - It can also be used for general purpose hand and splicing applications. Its easy to remove protective top coat makes it to simple to unwind and it quick removal adhesive leaves behind no sticky residue. The adhesive is pressure sensitive and heat activated. The dryer and warmer the installations are, the better the adhesive will attach. 2″ x 55 yards (50 meters, 165 feet) shurtape double coated/sided tape. Premium performance shurtape double-coated tape has a versatile adhesive system that provides superior hold to a variety of surfaces including metal, plastics and many other irregular surfaces. Strong enough for use in construction and automotive industry. Make sure you really press it firmly into place when applying and get it as warm as possible in the room to secure the adhesive. While the surface of the tape is moisture resistant the adhesive is definitely not. Its special poly laminate material provides super high tensile strength and is constructed to stand up to demanding applications such as mounting banners, emblems and nameplates, light signs, window blinds and many more it also works great for long-term or permanent bonding and attachment applications including pop displays and laminating materials. Please note surfaces should be as clean, dust free, and dry as possible before application.

 

3M Double Coated Paper Tape 410M 1 in x 36 yd 50 mil Pack of 1
3M Double Coated Paper Tape 410M, 1 in x 36 yd 5.0 mil (Pack of 1)
3M Double Coated Paper Tape 410M, 1 in x 36 yd 5.0 mil (Pack of 1) - General industrial, general purpose, multi-use and multipurpose applications. Natural rubber double coated tape with heavy paper carrier for increased strength and dimensional stability.

 

3M Double Coated Tape 9576 Clear Kut 2 in x 60 yd 40 mil Pack of 12
3M Double Coated Tape 9576 Clear Kut, 2 in x 60 yd 4.0 mil (Pack of 12)
3M Double Coated Tape 9576 Clear Kut, 2 in x 60 yd 4.0 mil (Pack of 12) - High-tack, double-coated tape with proven performance for paper web splicing and general purpose bonding. Used for bonding, attaching, joining affixing used for splicing papers, films and foils.

 

3M 9088 Clear Acrylic High Performance Double Coated Tape 1 x 5yd 1 roll
3M 9088 Clear Acrylic High Performance Double Coated Tape, 1″ x 5yd (1 roll)
3M 9088 Clear Acrylic High Performance Double Coated Tape, 1″ x 5yd (1 roll) - Resists solvents, uv rays and plasticizers. High level adhesive peel and shear performance. Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates. Excellent adhesion to both high and low surface energy substrates. Excellent initial adhesion.

 

3M Double Coated Tape 444 Clear 1 in x 36 yd 39 mil Case of 36
3M Double Coated Tape 444 Clear, 1 in x 36 yd 3.9 mil (Case of 36)
3M Double Coated Tape 444 Clear, 1 in x 36 yd 3.9 mil (Case of 36) - Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates. Resists solvents, uv rays, and plasticizers. High tack, excellent adhesion to most paper stocks good low temperature performance and peel strength on many surfaces. High level adhesive peel and shear performance. Excellent initial adhesion.

 

591500 3pk 12mm 12 Double Coated Tape
591/500 3pk 12mm (1/2″) Double Coated Tape
591/500 3pk 12mm (1/2″) Double Coated Tape - White colored, easy release treated crepe paper liner allows for either machine or hand application. A bleached flatback paper product coated with a high shear resistant pressure-sensitive natural rubber/resin adhesive on both sides that bond equally as well to almost any surface. The 591 tapes hold securely and release without residue left behind.

 

3M Double Coated Tape 415 Clear 2 in x 36 yd 40 mil Case of 24
3M Double Coated Tape 415 Clear, 2 in x 36 yd 4.0 mil (Case of 24)
3M Double Coated Tape 415 Clear, 2 in x 36 yd 4.0 mil (Case of 24) - Repostionable adhesive. Excellent uv resistance good adhesion to a wide variety of materials such as hse high surface energy, lse low surface energy and metals good temperature and humidity resistance. 1″ x 2″ pads. Hanging art. Picture mounting.

 

3M Double Coated Tape 415 Clear 4 in x 36 yd 40 mil Case of 8
3M Double Coated Tape 415 Clear, 4 in x 36 yd 4.0 mil (Case of 8)
3M Double Coated Tape 415 Clear, 4 in x 36 yd 4.0 mil (Case of 8) - Commercial printing, general industrial, print and print finishing, paper and print. Excellent uv resistance good adhesion to a wide variety of materials such as hse high surface energy, lse low surface energy and metals good temperature and humidity resistance. High performance splicing in printing applications good on films and foils. This is good for splicing, adhering, joining, affixing, bonding, mounting, holding, and attaching dissimilar materials high speed flying splices and zero speed splices on most grades of paper such as newsprint, clay coated and corrugated stocks splicing.

 

3M 9088 CIRCLE-1-250 Clear Acrylic High Performance Double Coated Tape 00083 Thick 1 length 1 width Pack of 250
3M 9088 CIRCLE-1″-250 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 1″ length, 1″ width (Pack of 250)
3M 9088 CIRCLE-1″-250 Clear Acrylic High Performance Double Coated Tape 0.0083″ Thick, 1″ length, 1″ width (Pack of 250) - Excellent adhesion to both high and low surface energy substrates. Resists solvents, uv rays, and plasticizers. Excellent initial adhesion. High level adhesive peel and shear performance. Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates.

 

Tesa 4965 Double-coated Tape with High Shear and Temperature Resistance - 2 x 60YD - 1 rollorder
Tesa 4965 Double-coated Tape with High Shear and Temperature Resistance – 2″ x 60YD – 1 roll/order
Tesa 4965 Double-coated Tape with High Shear and Temperature Resistance – 2″ x 60YD – 1 roll/order - Tesa 4965 is a transparent double-sided tape consisting of a pet backing and a modified acrylic adhesive. Good value. This is a 60 yard roll, most rolls on amazon are 36yd.

 

Intertape Polymer Group - Double Coated Tapes 592 White 24Mm X 33M Crepe Double Faced Tape 761-82739 - 592 white 24mm x 33m crepe double faced tape
Intertape Polymer Group – Double Coated Tapes 592 White 24Mm X 33M Crepe Double Faced Tape: 761-82739 – 592 white 24mm x 33m crepe double faced tape
Intertape Polymer Group – Double Coated Tapes 592 White 24Mm X 33M Crepe Double Faced Tape: 761-82739 – 592 white 24mm x 33m crepe double faced tape - Made in usa. Unique double-coated mounting tape securely mounts posters and lightweight objects on wood walls or doors, tile, glass, refrigerators, vinyl wallpaper, and primed and painted walls. Double coated tape. Mounts posters and lightweight objects securely. Removes easily without mess or damage. Easy removal. To most surfaces.

 

JVCC DC-UHB45 Ultra High Bond Double Coated Tape 12 in x 36 yds Translucent
JVCC DC-UHB45 Ultra High Bond Double Coated Tape: 1/2 in. x 36 yds. (Translucent)
JVCC DC-UHB45 Ultra High Bond Double Coated Tape: 1/2 in. x 36 yds. (Translucent) - Rugged metal to metal bonds to replace welding, rivets, bolts, screw and cementing. Withstands a wide range of weathering and temperature conditions without losing adhesion. Notes sizes shipped will typically be the tape industry standard metric-cut sizes, i. Jvcc uhb45 ultra high bond double coated tape is a 45 mil thick structural grade tape comprised of an integral core of solid acrylic polymer, coated on both sides with a uniform high-tack acrylic adhesive, and carried on a white polyethylene release liner. Solid acrylic core gives tape superior strength it can be easily applied and cleanly cut, yet is flexible, moldable, compressible and conformable to intricate shapes. 7mm wide. Not recommended for bonding teflon, tedlar, silicone or epdm. It will maintain adhesion at sub-zero temperatures and is non-staining and will not harden or become brittle with age. E. Provides a superior, permanent bond between a wide variety of substrates, including glass, sealed wood, metals, painted metals, composites, and some plastics. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). It isolates and dampens vibration and shock. This product’s actual size is 12. If not otherwise specified widths shown in dropdown are in inches. Dc-uhb45 is approved for certain gm, ford and chrysler specifications. Tape will bond to most surfaces, but thorough evaluation is recommended when bonding low energy surface material such as pvc, abs, polyethylene (pe) and polypropylene (pp). Jvcc uhb45 is used primarily in the transportation industry, automotive, truck, trailer and bus, signs, graphic art assemblies, furniture/appliance manufacturing and rv skin to frame assembly.

 

JVCC DC-UHB20FA-C Ultra High Bond Double Coated Tape 14 in x 36 yds Clear
JVCC DC-UHB20FA-C Ultra High Bond Double Coated Tape: 1/4 in. x 36 yds. (Clear)
JVCC DC-UHB20FA-C Ultra High Bond Double Coated Tape: 1/4 in. x 36 yds. (Clear) - This product’s actual size is 6. Used as a mounting tape in the illuminated sign industry, for fabricating road signs, joining of metals and plastic trims in furniture construction and architectural applications. At a minimum application pressure should be 15 pounds per inch of tape width in order to achieve maximum bond strength. Jvcc uhb20fa-c ultra high bond double coated tape is constructed of a clear foamed acrylic system which has excellent all around bonding properties which allows for very high performance in the most demanding of applications. The dwell time the tape needs to be in contact with both surfaces, before it reaches it maximum adhesion, is 1 to 24 hours. Tape is carried on a red, release coated polyethylene liner that is easily removed. Tape will bond to most surfaces including many plastics, composites, sealed woods and metals however thorough evaluation is recommended when bonding to low energy surface material such as polyethylene, polypropylene, silicones and teflon. Used in automotive aftercare market and in body shops for crash repair. E. Has good uv resistance. Notes sizes shipped will typically be the tape industry standard metric-cut sizes, i. The pressure sensitive acrylic composition has very good tack has excellent adhesion to a variety of surfaces and has high shear strength performance. Ideal in the transportation industry. If not otherwise specified widths shown in dropdown are in inches. When applying the tape after removing the release liner be careful not to contaminate the acrylic adhesive and try to immediately bond the tape to the surface without entrapping air between the tape and the surface it is being applied to. For lower energy surfaces may need to use an adhesive promoter/primer such as ipa (isopropanol) on the substrate prior to application. 3mm wide. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size).

 

3M 97370 Double Coated Tape Double Linered 9496LE 24 x 36 6 mil Clear
3M 97370 Double Coated Tape Double Linered 9496LE, 24″ x 36″ 6 mil, Clear
3M 97370 Double Coated Tape Double Linered 9496LE, 24″ x 36″ 6 mil, Clear - Backside adhesive provides an excellent bond to low surface energy substrates including powder coatings and plastics such as polypropylene (pp). Backside adhesive provides excellent holding power and anti-lifting properties. Faceside adhesive provides excellent bond strength to a variety of high surface energy substrates such as metals and high surface energy plastics, including abs, acrylic, and polycarbonate. Polyester film carrier provides dimensional stability for easier to handle during slitting and die-cutting. Differential adhesion provides ability to attach dissimilar substrates with ease.

 

3M 9629PC 0375 x 60yd Double Coated Tape 0375 x 60 Yard
3M 9629PC 0.375″ x 60yd Double Coated Tape 0.375″ x 60 Yard
3M 9629PC 0.375″ x 60yd Double Coated Tape 0.375″ x 60 Yard - Resistance to the effects of high temperatures, solvents, humidity, uv exposure, and water once applied. Constructed with a clear pet carrier for dimensional stability. Quick bonding time. Suitable for high bonds on low surface energy plastics and powder coated paints. Excellent adhesion to hdpe, ldpe, and pp.

 

3M 9629PC CIRCLE-2500-100 Double Coated Tape 25 Diameter Circle Roll of 100
3M 9629PC CIRCLE-2.500″-100 Double Coated Tape 2.5″ Diameter Circle (Roll of 100)
3M 9629PC CIRCLE-2.500″-100 Double Coated Tape 2.5″ Diameter Circle (Roll of 100) - Excellent adhesion to hdpe, ldpe, and pp. Quick bonding time. Suitable for high bonds on low surface energy plastics and powder coated paints. Resistance to the effects of high temperatures, solvents, humidity, uv exposure, and water once applied. Constructed with a clear pet carrier for dimensional stability.

 

Intertape Polymer Group - Double Coated Tapes Ca48 591 Nat 18Mmx329M Ipg Double-Coated 761-72699 - ca48 591 nat 18mmx329m ipg double-coated
Intertape Polymer Group – Double Coated Tapes (Ca/48) 591 Nat 18Mmx32.9M Ipg Double-Coated: 761-72699 – (ca/48) 591 nat 18mmx32.9m ipg double-coated
Intertape Polymer Group – Double Coated Tapes (Ca/48) 591 Nat 18Mmx32.9M Ipg Double-Coated: 761-72699 – (ca/48) 591 nat 18mmx32.9m ipg double-coated - High level adhesive peel and shear performance. Excellent adhesion to both high and low surface energy substrates. Excellent initial adhesion. Resists solvents, uv rays and plasticizers. Used for high performance bonding typically with pop displays, metal fabrication, indoor/outdoor signs, blister packs and nameplates.

 

Scotch Double Coated Paper Tape 200F Performance Temperature 36 yd Length x 1 Width White Case of 36
Scotch Double Coated Paper Tape, 200F Performance Temperature, 36 yd Length x 1″ Width, White (Case of 36)
Scotch Double Coated Paper Tape, 200F Performance Temperature, 36 yd Length x 1″ Width, White (Case of 36) - Tape type graphic size 1ampquot x 36 yds core size 3ampquot colors natural. Sometimes you need a tape with adhesive on both sides–now you have one. Tape features a paper carrier specially treated to improve strength and removability. This double-sided tape utilizes a natural rubber adhesive system, offering good to excellent adhesion on a variety of surfaces.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.