Shurtape P-724 Console Mixer Marking Tape 3/4″ x 60 yards- (12 Pack) - A console with no marking tape can turn a night behind the mixing board into an inconvenient, disorienting mess. Shurtape p-724 (formerly permacel 724) is also useful for blocking positions on stage and a thousand other uses. 4 mil tensile strength 35 lbs. Long thickness 6. 75″ wide x 60 yd. /In. Color white. Why take the risk shurtape p-724 is the professional’s preferred marking tape, holding fast and peeling away cleanly. Was that input mic 1 or mic 2 shurtape p-724 marking tape to the rescue this paper tape makes it easy to label inputs on a mixer or any other pro equipment, yet peels away cleanly after the gig and leaves no residue. Specifications 0. It’s easy to get lost behind a mixing board.
Shurtape PE-333 Economy Stucco Masking Film Tape: 2 in. x 60 yds. (Red with Straight edge) - Designed with a special, high-tack synthetic adhesive, pe 333 maintains a watertight seal, even in severe environments and weather conditions, and removes cleanly when the job is done. Features and benefits include non-uv-resistant polyethylene film tape, excellent conformability, maintains a watertight seal, removes cleanly, available with a serrated or straight edge. Adhesion 70 ounces per inch (to stainless steel test panel) tensile strength 19 pounds per inch (longitudinal) service/operating temperature 32f to 160f elongation 80% water vapor transmission rate 04 gram/100 sq inch/24 hour core 3-inch diameter. Shurtape pe-333 stucco masking film tape is a non-uv-resistant polyethylene film tape used to mask surfaces, such as windows and doors, during stucco application and painting, as well as for seaming underslab vapor barriers and holding poly-sheeting when building containments. Carrier/backing polyethylene (pe) film adhesive rubber thickness 7 mils (carrier, adhesive).
Shurtape Technologies PC600 General Purpose Grade Cloth Duct Tape, 55m x 48mm - Adhesion to stainless steel 50 oz/in width. Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Natural rubber adhesive. Polyethylene film with a cloth carrier backing. Shurtape general purpose grade cloth duct tape. Industrial, carpet, plumbing, hvac, sealing, waterproofing, patching and asbestos abatement applications. Service temperature range 50 to 200 degrees f. Us green building council, leed point contributor product. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Shurtape DF-545/NAT225 DF-545 Double Coated Cloth Carpet Tape: 2″ x 75 ft, Natural - Carrier/backing polyester/cotton blend cloth adhesive rubber-based release liner blue siliconized polyethylene film thickness 135 mils (carrier, adhesive) adhesion 45 ounces per inch (to stainless steel test panel) tensile strength 28 pounds per inch (longitudinal) service/operating temperature 50f to 200f elongation 9% core 3-inch diameter. Shurtape df-545 double coated cloth carpet tape is a 135 mil thick premium grade double-sided cloth tape used by the hospitality industry used as carpet tape to hold carpet and pad at convention centers, arenas, and hotels. Other applications include general purpose uses in maintenance construction hanging poly-sheeting in mold/asbestos remediation industry, and splicing applications the tape is engineered with a versatile adhesive system that provides strength and clean removability from most surfaces. Blended natural and synthetic rubber provides superior adhesion to concrete, tile, hardwood flooring, and other irregular surfaces a special poly laminate layer provides a high tensile strength in demanding construction, convention, and abatement applications because of the tape’s cloth carrier and its ability to remove without leaving adhesive residue behind this tape is also sometimes referred to as double-sided gaffers tape. Shurtape df 545 comes on a blue color film release liner (film liners are great for applying the tape over larger areas since a film liner will not tear however if you are looking for an easier to remove liner for smaller jobs please see a double-sided tape which an extended edge or a paper release liner).
Shurtape AF-100 Aluminum Foil Tape: 2-1/2 in. x 60 yds. (Silver Printed) - Gov. Ca. Warning this product can expose you to chemicals which is [are] known to the state of california to cause cancer and birth defects or other reproductive harm. It provides an air-tight seal and meets the ul 181 a-p standard for use as a closure material on fiberglass duct systems and ul 181 b-fx standards for use on flexible air ducts and closures (rolls are ul 181a-p/b-fx listed/printed). For more information go to www. The tape can also be used for other industrial applications requiring a tape with these characteristics and benefits. P65warnings. Shurtape af-100 aluminum foil tape is a 2 mil aluminum foil coated with an aggressive acrylic adhesive used in the hvac industry for joining and sealing joints, connections, and seams on rigid fiberglass ductboard and flexible air duct.
Shurtape CP-901/NAT260 CP-901 Steel Pipe Masking Tape: 2″ x 60 yd, Natural - Carrier/backing crepe paper adhesive solvent rubber thickness 64 mils (carrier, adhesive) adhesion 41 ounces per inch (to stainless steel test panel) tensile strength 24 pounds per inch (longitudinal) service/operating temperature 60f to 350f elongation 11% standards met astm d6123/d6123m-97, type i core 3-inch diameter. It can mask powder coating on steel pipes at 450-475f for short time durations (1-2 minutes) and up to 350f for longer time durations high initial tack on the tape enables quick and secure tabbing onto pipes and its backing prevents corrosion coating from being deposited on the pipe ends. It also has a special cured release system which ensures it adheres well to itself, preventing coating damage caused by loose tape ends in addition to these important characteristics, cp 901 is also splice free, providing excellent strength while reducing the number of breaks, and it is shear cut resulting in a clean, sharp coating edge. Shurtape’s cp 901 steel pipe masking tape is designed to offer optimum performance in the three most important criteria for oil & natural gas steel pipe coating applications it applies quickly, takes the heat effectively, and removes cleanly cp 901 has been field-tested and approved by various pipe coaters using the fusion bonded epoxy (fbe) coating process, which is used by the majority of pipe coaters in north america it has also been tested and proven in high-speed fbe. Shurtape cp-901 steep pipe masking tape is the first high-temperature masking tape in the industry which is designed specifically for steel pipe coating applications the tape is coated with a solvent rubber adhesive system that is purpose-built to perform at elevated temperatures yielding quick “stick” performance, excellent adhesion to the hot pipes, and easy, residue-free removal (also no charring of the tape).
Shurtape CP-743 Matte Black Paper Tape (aka Permacel P-743): 1/2 in. x 60 yds. (Black) - Shurtape cp-743 matte black paper tape is a photographer’s matte black masking tape it features an opaque, matte surface for light-free masking and has high quick stick & adhesion when reproducing photographs. Shurtape cp 743 paper tape is used for photographic reproduction work such as cropping and edging negatives, positioning negatives for contact printing, redacting legal documents prior to copying, and for blackout sealing of camera bellows and film holders against light leaks. One of the best features of shurtape cp-743 matte black masking tape is the clear adhesive unlike gaffers tape which has a white colored adhesive, cp-743 adhesive is clear and therefore not visible from the sides, cut edges, or other angles. Carrier/backing impregnated paper adhesive rubber-based thickness 65 mils (carrier, adhesive) adhesion 47 ounces per inch (to stainless steel test panel) tensile strength 24 pounds per inch (longitudinal) service/operating temperature 45f to 150f elongation 8% standards met astm d 6123/d 6123m-97 (2012), type i core 3-inch diameter. This is a reliable tape for use in photo studios, film processing laboratories, as well as in-home dark-rooms cp743 / p743 masking tape is also recommended for use as a chart tape or a framer tape to hinge prints onto mat board it features an easy, consistent unwind and is hand tearable.
Shurtape PC 618 Performance Grade, Colored Cloth Duct Tape, 72mm x 55m, Black, 1 Roll (203876) - Performance grade cloth duct tape, available in a wide variety of colors, for holding, securing, seaming, repairing, bundling, splicing, packaging, color-coding and masking in hvac, industrial, commercial, utilities, trucking and automotive applications, and can also be used as a condensation barrier in appliance assemblies. Pc 618 is easy to unwind and tear, conforms well to a variety of surfaces and offers excellent holding power, no matter the job.
AGN 134338 Shurtape HW-300 Housewrap Sheathing Tape: 2-1/2″ x 60 yd, Red/Black (Fivе Расk) - For more information go to www. Hw 300 housewrap/sheathing tape a closure tape for sealing seams on all types of housewrap, sheathing, insulation and vapor barrier materials used in residential and commercial construction applications. Ccmc-certified hw 300 can be applied in vast temperature ranges and in humid conditions, and combines the high shear and permanent hold you expect with a solvent-free, water-based, permanent adhesive that has a less astringent smell than many solvent-based sheathing tapes, a refreshing change for a long day on the jobsite. P65warnings. Gov. Ca. Warning this product can expose you to chemicals which is [are] known to the state of california to cause cancer and birth defects or other reproductive harm.
Shurtape 152305 PC-599 ShurGRIP Heavy Duty Duct Tape: 2″ x 60 yd, Silver - Used in remediation (ie asbestos-abatement) and restoration industries offers excellent shear and adhesion characteristics to poly-sheeting, rough surfaces and in colder temperatures. Shurtape pc 599 is one of shurtape’s most adhesive duct tapes if instead, you are looking for shurtape’s thicker very high tensile strength duct tape please see shurtape pc 745. Pc 599 comes with shurtape’s polyblended co-ex technology with is a co-extrusion process which melds polyethylene, cloth, and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate). Standards met us green building council, leed point contributor product carrier/backing polyethylene-coated cloth adhesive natural rubber thickness 9 mils (carrier, adhesive) adhesion 131 ounces per inch (to stainless steel test panel) tensile strength 20 pounds per inch (longitudinal) service/operating temperature 40f to 200f elongation 21% core 3-inch diameter. Shurtape pc-599 shurgrip heavy duty duct tape is a cloth duct tape used for industrial, plumbing, hvac, packaging, bundling, sealing, seaming, repairing, holding and waterproofing.
Shurtape PC460 ShurGRIP Utility 2″ Cloth Duct Tape, Silver, Case of 24, 60 Yards/Roll - 181in roll width 1. Includes (24) rollsfeatures shurgrip utility grade duct tape good conformability will not twist or curl during application waterproof backing aggressive natural rubber adhesive made using polybonded co-ex technologyspecifications color silver backing material polyethylene film with a cloth carrier adhesive natural rubber adhesive adhesion to stainless steel 86 oz/in width elongation 20% tensile (breaking strength) 17 lbs/in width thickness 6. 0 mils service temperature range 40 f, 200 f core size 3. 89in case size 24 rollsshurgrip utility grade cloth duct tape for non-critical, general use applications, including packaging, bundling, sealing, repairing, holding and waterproofing. This economical, co-extruded solution offers good conformability and easy handling to prevent it from twisting or curling during application. 0″ roll diameter 4.
Shurtape PC-622 Contractor Grade Duct Tape: 2 in. x 60 yds. (Olive Drab) - Shurtape pc 622 has high tensile strength, is conformable, and has excellent holding power it is currently offered in 5 stock colors black, red, silver-white and olive drab. Pc 622 comes with shurtape’s polyblended co-ex technology with is a co-extrusion process which melds polyethylene, cloth, and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength that will not delaminate). Certifications tested in accordance with ul 723 green building council, leed point contributor product. Please note shurtape’s version of olive drab is very dark as displayed in the product photo. Shurtape pc-622 premium-grade stucco duct tape is a 12 mil thick premium-grade duct tape used for hvac duct systems the protection of window and door frames during stucco application high-performance motorsports applications silk screening and heavy-duty bundling, sealing, seaming and splicing.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.